A@h 2.7 with Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1l with “flortz” patch

how to install hfc card

 

after unload asterisk and amportal whit

amportal stop

 

type “setup”

unselect zaptel in system service…

and set the lan

 

—>reboot<— data-blogger-escaped-br=”br”>
cd /usr/src
wget http://www.junghanns.net/downloads/bristuff-0.3.0-PRE-1l.tar.gz
tar -zxvf bristuff-0.3.0-PRE-1l.tar.gz
cd bristuff-0.3.0-PRE-1l
./download.sh
cd zaphfc

wget dondisperato.0catch.com/zaphfc_0.3.0-PRE-1f_florz-11.diff
patch < zaphfc_0.3.0-PRE-1f_florz-11.diff
cd ..

ln -s /usr/src/2.6.9-22.EL /usr/src/linux-2.6
cd zaptel-1.2.3
make clean
make
make install
cd ..
cd libpri-1.2.2
make clean
make
make install
cd ..
cd zaphfc
make clean
make

cp zaptel.conf /etc/zaptel.conf
——>yes<——- data-blogger-escaped-br=”br”>
nano /etc/rc.d/rc.local

at first add this line:

modprobe zaptel
insmod /usr/src/bristuff-0.3.0-PRE-1l/zaphfc/zaphfc.ko
sleep 10
ztcfg -vv

nano /etc/asterisk/zapata.conf

this is my zapata:

[channels]
language=it
switchtype=euroisdn
;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to unknown.
pridialplan=local
prilocaldialplan=local

signalling = bri_cpe_ptmp
;signalling = fxs_ks
rxwink=300

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
nationalprefix = 0
internationalprefix = 00
faxdetect=incoming
group=0
callgroup=1
pickupgroup=1
immediate=yes
context=from-pstn
channel => 1-2

________________________________________
now you can recompile asterisk
cd /usr/src/bristuff-0.3.0-PRE-1l/asterisk-1.2.4
make clean
make
make install

reboot…
________________________________________

that’s all
donDisperato

Questo articolo è stato pubblicato in Voip da Admin . Aggiungi il permalink ai segnalibri.

Un pensiero su “A@h 2.7 with Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1l with “flortz” patch

  1. I fully agree with everyone on the Trixbox surppot. It’s bad enough they don’t have any technical surppot on the forums, but I’m beginning to think the whole system is run by a bunch of kids. When you do a yum install kernel-devel’ and it’s not in the repository.. you have a problem. The first thing I do is turn off yum updates because they can’t seem to keep the repositories strait.. and in a production environment.. it’s just not acceptable. The fact that Trixbox is nothing more than other peoples work compiled into a single source is beginning to make me look into just using CentOS 5 and rpmforge.net or atrpms.net to install Asterisk and the other components such as FreePBX, etc.

Lascia un Commento