A@h 2.5 with Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1l without flortz patch

how to install hfc card

 

after unload asterisk and amportal whit

amportal stop

 

type “setup”

unselect zaptel in system service…

and set the lan

 

—>reboot<— data-blogger-escaped-br=”br”>
cd /usr/src
wget http://www.junghanns.net/downloads/bristuff-0.3.0-PRE-1l.tar.gz
tar -zxvf bristuff-0.3.0-PRE-1l.tar.gz
cd bristuff-0.3.0-PRE-1l
./download.sh
ln -s /usr/src/2.6.9-22.EL /usr/src/linux-2.6
cd zaptel-1.2.3
make clean
make
make install
cd ..
cd libpri-1.2.2
make clean
make
make install
cd ..
cd zaphfc
make clean
make

cp zaptel.conf /etc/zaptel.conf
——>yes<——- data-blogger-escaped-br=”br”>
nano /etc/rc.d/rc.local

at first add this line:

modprobe zaptel
insmod /usr/src/bristuff-0.3.0-PRE-1l/zaphfc/zaphfc.ko
sleep 10
ztcfg -vv

nano /etc/asterisk/zapata.conf

this is my zapata:

[channels]
language=it
switchtype=euroisdn
;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to unknown.
pridialplan=local
prilocaldialplan=local

signalling = bri_cpe_ptmp
;signalling = fxs_ks
rxwink=300

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
nationalprefix = 0
internationalprefix = 00
faxdetect=incoming
group=0
callgroup=1
pickupgroup=1
immediate=yes
context=from-pstn
channel => 1-2

________________________________________
now you can recompile asterisk
cd /usr/src/bristuff-0.3.0-PRE-1l/asterisk-1.2.4
make clean
make
make install

reboot…
________________________________________

that’s all
donDisperato

Questo articolo è stato pubblicato in Voip da Admin . Aggiungi il permalink ai segnalibri.

Un pensiero su “A@h 2.5 with Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1l without flortz patch

  1. Yes, I completely agree with you on the Trixbox surppot forums. I wouldn’t say thats an issue with Fonality (the folks who bought AAH and turned it into TxBx), but rather with the fact that since the switch all the AAH folks have moved elsewhere or become silent. The forums are full of people asking questions and no answers. Pretty soon that gets people turned off about the forums altogether. Also, the new website is a bit of a hassle to use.I think that just like FC/RHEL, Fonality is concentrating on the Pro version. Hard to blame them since thats what makes $.And as price-gouging as the VoIPSupply cost is, note that old school PBX hardware literally costs an arm and a leg. And this one PCI card really gets the job done. Had mine for a while now, love it.

Lascia un Commento