asterisk@home 2.0 and HFC isdn

 

 

 

A@h 2.0

how to install hfc card

 

after unload asterisk and amportal whit

amportal stop

 

type “setup”

unselect zaptel in system service…

and set the lan

 

—>reboot<— data-blogger-escaped-br=”br”>
cd /usr/src
wget http://www.junghanns.net/downloads/bristuff-0.3.0-PRE-1.tar.gz
tar -zxvf bristuff-0.3.0-PRE-1.tar.gz
cd bristuff-0.3.0-PRE-1
./download.sh
cd zaphfc
ln -s /usr/src/kernels/2.6.9-22.EL-i686 /usr/src/linux-2.6
ln -s /usr/src/kernels/2.6.9-22.EL-i686 /usr/src/linux
cd ..
cd zaptel-1.2.0
make clean
make
make install
cd ..
cd libpri-1.2.0
make clean
make
make install
cd ..
cd zaphfc
make clean
make

cp zaptel.conf /etc/zaptel.conf
——>yes<——- data-blogger-escaped-br=”br”>
nano /etc/rc.d/rc.local

at first add this line:

modprobe zaptel
insmod /usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko
sleep 10
ztcfg -vv

nano /etc/asterisk/zapata.conf

this is my zapata:

[channels]
language=it
switchtype=euroisdn
;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to unknown.
pridialplan=local
prilocaldialplan=local

signalling = bri_cpe_ptmp
;signalling = fxs_ks
rxwink=300

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
nationalprefix = 0
internationalprefix = 00
faxdetect=incoming
group=0
callgroup=1
pickupgroup=1
immediate=yes
context=from-pstn
channel => 1-2

________________________________________
now you can recompile asterisk
cd /usr/src/bristuff-0.3.0-PRE-1/asterisk-1.2.0
make clean
make
make install

reboot…
________________________________________

that’s all
donDisperato

Questo articolo è stato pubblicato in Voip da Admin . Aggiungi il permalink ai segnalibri.

Un pensiero su “asterisk@home 2.0 and HFC isdn

  1. Bravo!!!!thx a lot 4 this post, i needed to start Asterisk 1.8 aulaamticolty on my Ubuntu Server and had no idea as how to do it. Your post did the Trick!!!(i still don’t understand starting scripts on linux though, but that’s another issue).Gracias mil.

Lascia un Commento